E-Filter L2 simple

Created Wednesday 15 October 2014

Model for an E-Filter with dynamic energy and mass balances, taking a constant separation rate into account.

1. Purpose of Model


This model is used for the simulation of an ideal electrostatic dust filter for flue gas cleaning purposes with fixed separation rate.

2. Level of Detail, Physical Effects Considered and Physical Insight


2.1 Level of Detail


Referring to Brunnemann et al. [1], this model refers to the level of detail L2.

2.2 Physical Effects Considered


2.3 Level of Insight


Heat Transfer

Pressure Loss

Geometry


3. Limits of Validity


4. Interfaces


4.1 Physical Connectors


Basics:Interfaces:GasPortIn inlet
Basics:Interfaces:GasPortOut outlet
Basics:Interfaces:HeatPort a heat


5. Governing Equations


5.1 System Description and General model approach


The model is build up from a FlueGasCell and a e filter model. Please have a look into these models for further details



Summary

A summary record is available which bundles important component values.

7. Remarks for Usage


9. References

[1] Johannes Brunnemann and Friedrich Gottelt, Kai Wellner, Ala Renz, André Thüring, Volker Röder, Christoph Hasenbein, Christian Schulze, Gerhard Schmitz, Jörg Eiden: "Status of ClaRaCCS: Modelling and Simulation of Coal-Fired Power Plants with CO2 capture", 9th Modelica Conference, Munich, Germany, 2012

10. Authorship and Copyright Statement for original (initial) Contribution

Author:
DYNCAP/DYNSTART development team, Copyright 2011 - 2022.
Remarks:
This component was developed during DYNCAP/DYNSTART projects.
Acknowledgements:
ClaRa originated from the collaborative research projects DYNCAP and DYNSTART. Both research projects were supported by the German Federal Ministry for Economic Affairs and Energy (FKZ 03ET2009 and FKZ 03ET7060).
CLA:
The author(s) have agreed to ClaRa CLA, version 1.0. See https://claralib.com/pdf/CLA.pdf
By agreeing to ClaRa CLA, version 1.0 the author has granted the ClaRa development team a permanent right to use and modify his initial contribution as well as to publish it or its modified versions under the 3-clause BSD License.

11. Version History

Date - Version - Description of changes - author/revisor
25.06.2013 - v0.1 - initial implementation of the model - André Thüring, TLK-Thermo GmbH
03.04.2019 - added eye connector